Msg Nr.     : 33978 
Da          : EA5XE 
Per         : MODS  @EU      
Tipo/status : B$
Data/ora    : 0821/0427
Dimensione  : 3895
Titolo      : Alcune modifiche per l'FT 890 .
Bid (Mid)   : 701_EA5XE

FT890 MODS

                   YAESU FT890/AT mod.  TX 1,5 to 30 MHZ.
                   ======================================
 
 - Disconnect FT890 from all connections.
 
 - Open tranceiver like explained in your "OPERATING MANUAL".
 
 - Locate on the "CONTROL UNIT" jumper point JW 3001 and close it with solder.
 
 - Close tranceiver back and reconnect power.
 
 - Push PROC, AGC-F, IPO, ATT while power ON.
 
 - Now the display shows two digits of numbers and tree of letters (i.e 13 OFF)
   Rotate main knob and set the display to "02 ON". Now press the PROC button.
 
 - Power OFF and then back ON. It's all!
 
 - Now every time you want, you can change the programation, but you will
   allway lose the memories.
 
 - Other settings than "02 ON" are of no interest. This one give you 100 w
   and automatic antenna tuning between 1,5 and 30 mhz.
 
 
   
                                      /  \        
                                    -- -- --      73 de Romualdo
                                     (§..§)   
                                       /      EA5XE @ EA5XE.EAV.ESP.EU